For Learning Sequence Control

Elementary Level

PLC Sequence Control Course

PLC Sequence Control Course Elementary Level Elementary Level

PLC Sequence Control Course Recommended Materials
PLC Sequence Control Course Recommended Materials

PLC Sequence Control - Elementary Level!!

jp Japanese

Elementary Level

In the PLC Sequence Control Elementary Level, we cover everything from PLC wiring methods to simple circuit creation. Start by getting hands-on experience and learn as you go.


PLC Wiring Methods
Explains wiring methods for PLCs (Sequencers). Covers how to connect sensors to input terminal blocks and loads to output terminal blocks in an easy-to-understand manner.
How to Read Ladder Diagrams
With practice, ladder diagrams become easy to read. Learn how to visualize ladder diagrams for simple and intuitive understanding.
How to Read Ladder Diagrams (Contacts)
Explains the contacts (NO contacts, NC contacts) used in ladder diagrams. Learn various contact combinations. Start by mastering contacts first.
How to Read Ladder Diagrams (Self-Holding)
Explains how to read self-holding circuits using ladder diagrams. Self-holding is a fundamental concept in ladder diagrams that you must understand.
How to Read Ladder Diagrams (Troubleshooting)
Investigate the cause of malfunctions while checking ladder diagrams. Introduces a method to trace causes from output coils in sequence, simulating actual faults.
Starting GX Developer
This page explains how to start GX Developer, the ladder diagram editing software, and covers the initial model settings, first-time configuration, and basic usage.
Starting GX Works2
This page explains how to start GX Works2, the ladder diagram editing software, and covers the initial model settings, first-time configuration, and basic usage.
Starting CX-Programmer
This page explains how to start CX-Programmer, the ladder diagram editing software, and covers the initial model settings, first-time configuration, and basic usage.
Creating Ladder Circuits
Learn how to enter and convert circuits using GX WORKS2. Practice entering contacts and coils while actually building a self-holding circuit.
Writing to PLC
Explains how to transfer programs to the PLC using GX WORKS2. Learn communication settings, transfer methods, and RUN-mode write in GX WORKS2.
Reading from PLC and Monitoring
Explains how to read from and monitor the PLC. Reading and monitoring are fundamental PLC operations. Learn the basic operations, key points during monitoring, and shortcut keys.
Simple Circuit Creation
Explains circuit creation in practice, including input methods. Learn how to create a functioning ladder diagram on this page.
PLC Connection Methods
Explains how to connect a PC to a PLC (Sequencer). While briefly covered in the Writing to PLC section, this page provides more detailed information. Check here if needed.
Creating Ladder Circuits (Omron)
Explains how to write and operate ladder diagrams using CX-Programmer. As this is a usage guide, the focus is on how to use CX-Programmer rather than circuit explanations.
Copyright (C) 2010 PLC Sequence Control Course, All rights reserved.